Stairs plastic floor installation methods and precautions

Plastic-wood flooring is a new type of environment-friendly wood-plastic composite product. The wood phenol produced in the process of producing medium and high-density fiberboard is made of wood-plastic composite material by adding recycled plastics through granulation equipment, and then extruded. Made of wood-plastic flooring. Today we will take a look at the installation methods and precautions for the plastic floor .

Stairs plastic floor installation method

Step 1: Leveling

That is, to measure the flatness of the floor, an error of more than 3 mm per meter needs to be leveled first. This step itself is not particularly difficult to handle, as long as it is carefully handled. Of course, many people will choose to go to the decoration company to deal with this step, but professional decoration staff is good, but they understand that some of the interior decoration is not a bad idea.

Step 2: Installation After Leveling

After leveling, you can start the installation. Before starting, you should pay attention to a sequence of problems! Generally, we recommend that you install from the bottom up, so that you can operate it more smoothly and can check the compressive strength and regularity of the staircase floor.

Later, when installing on a flat floor, it is often the case that you need to assemble flooring. This is related to the worker's measurement level. If the measurement line is not standard at the time of cutting, the stitching seam will be too large. When cutting the floor, if the worker cuts inaccurately, it will lead to a noticeable difference in the floor of the staircase after installation, which will seriously affect the appearance.

Stairs laying flooring need to pay attention to the place

1, floor board surface problem

The first level of the stairs is the facade. Therefore, when installing the floor, the expansion and contraction rate of the floor must be taken into consideration. When the ground floor installation is extended to the facade, the interface between the facade floor and the floor floor should retain enough space. After the façade floor is stuck on the ground floor, the next step installation of the stair floor can be performed.

2, the problem of floor size

In the installation of the flat floor, it is necessary to accurately measure the level of height related to ensure the standards of measuring the line and cutting cutting. The gap between the facade and the plane shall not exceed 0.5mm; the gap between the facade or plane and the wall or skirting board shall not exceed 1mm; the seam between the floor and the floor surface shall not exceed 0.2mm, and the solid wood floor shall not be allowed. Allow more than 0.5mm.

The above methods and precautions for installing the plastic floor of the stairs are briefly introduced here. I hope to help you. For more information, please visit this website. Stay tuned.

Stairs Wood Flooring Installation

Photoluminescent Exit Man Sign Left, Right, Up, Down

Photoluminescent Sign,Photoluminescent Exit Man Sign Left,Photoluminescent Exit Man Sign Up,Photoluminescent Exit Man Sign Right

JINAN REALGLOW CO.,LTD , https://www.realglowsign.com