Plastic steel doors and windows use attention
1. When installing doors and windows, make sure to remove the protective film from the frame and clean it thoroughly. Leaving the film on can cause adhesive residue, dirt, or sticky dust to remain, which is not only unattractive but also difficult to clean later.
2. Always close the casement window when strong winds are blowing to prevent damage and ensure proper operation.
3. Avoid hanging heavy objects on the door or window hardware, as this can cause wear and tear or even structural damage over time.
4. To open a lower-hanging window, simply change the direction of the handle. Take a moment to understand how it works so you don’t accidentally damage the mechanism.
5. For sliding doors and windows, regularly clean the track to keep it free from dust and debris. This ensures smooth movement and prevents damage caused by hard particles in the groove.
6. Plastic doors and windows come with built-in drainage and pressure equalization systems in the frame and sash. These features help maintain good sealing and water resistance. Never block the drainage or air vents, as this can lead to water leakage, especially during rain or snow, causing inconvenience in daily use.
7. When opening or closing a sliding window, apply force near the middle or lower part of the sash for better control. Avoid using excessive force, as this can shorten the lifespan of the window.
8. When cleaning the insect screen, do not remove the rubber seal or take off the mesh entirely. Instead, clean the entire screen using a water-soluble detergent and a soft cloth to avoid damaging the structure.
9. During winter, if you’re not using the insect screen, you can remove it and store it properly. Store the screen at least one meter away from heat sources. Place it vertically on its flat or short side and avoid putting any heavy objects on top to prevent warping or deformation.
10. When using a sliding window screen, be sure to check the vertical frame of the inner screen to maintain good sealing and prevent air leaks.
Step Drill Bit,Reamer Straight Drill Bits,Spiral Step Drill Bit,Groove Drill Bit
Danyang Yongshun Tools Co.,Ltd , https://www.china-drill-bit.com