Use the floor or the tile?
Would you buy a tile, if not, then you should take a good look at my article. In the following, Xiaobian will tell you how to distinguish between good and bad tiles, as well as the method of purchasing the floor, I hope to be helpful to everyone. If you want Xiaobian to choose the floor, or use the tile, Xiaobian will choose to use the floor.
How to distinguish between good and bad tiles:
1. Today, Xiao Bian told everyone that the problem related to house decoration is the problem of tiles.
2. Look, mainly to see if there are black spots, bubbles, pinholes, cracks, scratches, stains, missing edges, and angled vitrified tiles on the surface of the tile. Also pay attention to whether there are defects such as leakage and leakage. . Look at the bottom mark of the embryo. The bottom of the product produced by the regular manufacturer has a clear product mark. If it is not or is particularly blurred, it is recommended to be careful!
3. Hey, it is the weight of the enamel, the feel of the test tile, the product of the same specification, the quality is good, the brick of the high density is relatively heavy, and the quality of the product is lighter.
A total of 2 pictures> 03 listen, by tapping the tiles, by listening to the sound to identify the quality of the tile, the following two methods according to the kitchen wall tiles and vitrified tiles to introduce the tapping method: wall tiles or small-size tiles are generally used One hand and five fingers are separated, the tile is lifted, and the other hand strikes the tile face. If the sound is metallic, the quality of the tile is good.
4. The floor tiles (the living room and other floors are made of vitrified tiles or antique bricks). Lift the side of the tile with one hand and tap the middle of the tile with the upper part of the palm of the other hand. If the sound is loud and the echo is long. If the sound of a bronze bell is struck, the ceramic tile has a higher degree of porcelain, high wear resistance, high flexural strength, low water absorption, and is not susceptible to pollution. If the sound is turbid and there is no echo, the degree of porcelain is low (even exists). Crack), the ceramic body of the ceramic tile is not fully calcined, the wear resistance is poor, the bending strength is low, and the water absorption rate is also high. Such a vitrified brick is highly susceptible to contamination.
How to buy the floor:
1. The lighting of the living room can also limit the choice of floor color. For a well-lit room, you can choose a larger range, and you can control the dark and light colors. For rooms with low floors and low lighting, pay attention to some floor materials with higher brightness and more suitable colors, and avoid using darker materials as much as possible.
2. The color of the ground is matched. The color of the ground is to bring out the color of the furniture, and the decoration of the ground is a long-term decoration. It will not be replaced frequently under normal circumstances, so everyone should consider various factors when choosing. Among them, the earth color and the neutral color have always been the mainstream colors, but if they are properly matched, the dark colors and the light colors can achieve the desired effect.
3. As we all know, color can affect people's visual effects. Warm colors are expanded colors, and cool colors are contracted colors. Therefore, it is necessary to choose a cool color of dark color on the floor of a small room, which will give people a feeling of large area. If you choose a warm color floor with a strong color, it will make the space appear narrower and increase the feeling of depression. In addition, in the selection of the color of the floor, it should be inclined to small texture or straight grain effect, avoiding large and chaotic patterns.
The floor is the most commonly used decoration material in the decoration of the house, so when you buy the floor, you must buy it well, according to the method I mentioned above, so that you can buy a good floor. In order to make the decoration of the house beautiful. The advantage of the floor will be much higher than the tile, I suggest you still choose to use the floor.
Prime View International Co., Ltd. 's products include ultra-thin and light, narrow bezels, transparent displays, LTPS, OLED, and touch solutions. PVI also has the most complete generation production line from 3.5G, 4G, 4.5G, 5G, 6G, 7.5G to 8.5G, which can provide a variety of LCD applications required panel products, size range from 1.2 "to 71" TFT-LCD Panel.
We continuously improve manufacturing technology on the research and development, including simplifying process, highly automated, and reducing components, etc., in order to improve the production efficiency, increase production capacity, more can improve the quality of products. Including strict sampling detection scheme, the condition of simulating various climate environment and the external force to test the product, and for different electronic application products to accurate detection. In addition, the company is constantly improving the process to improve efficiency and productivity, reduce production costs, in order to provide customers with more real-time, more competitive products and services, so as to achieve a win-win situation with customers to create profits.
Lg Tft,Tft Color Screen,Tft Raspberry Pi 3,Arduino Mega Tft Shield
Tonya Display Limited , https://www.tydisplay.com