New regulations for labor protection supplies for power workers
**Labor Protection Supplies Management Regulations**
1. **Purpose**
To effectively implement the Party and State’s guidelines on labor protection, and to strengthen the management of personal protective equipment (PPE) for company employees, these regulations have been established.
2. **Scope**
These regulations apply to all company agencies, branches, project departments, operating units, and grassroots units.
3. **Selection of Labor Protection Supplies**
3.1 All PPE provided to individual workers must comply with GB1161-89 "Regulations for the Selection of Labor Protection Articles."
3.2 Employees who are at risk of harm or occupational hazards during production must be equipped with necessary PPE as required.
3.3 Personal protective equipment is intended to prevent or reduce accidents and occupational hazards in the construction process, ensuring employee safety and health. It should be distributed during working hours and is a critical preventive measure for safe production. It must not be confused with improvements in living benefits.
3.4 Employees engaged in special operations or working in hazardous environments must use specific PPE based on their work conditions.
3.4.1 Workers exposed to high heat, fire risks, toxic substances, radioactive materials, or corrosive chemicals must be issued flame-resistant clothing, acid/alkali resistant garments, radiation suits, gas masks, aprons, and rubber gloves.
3.4.2 Employees facing electric shock risks must be provided with insulating protective gear.
3.4.3 Protective shoes should be selected based on the working environment—such as anti-slip, heat-resistant, acid/alkali-resistant, oil-resistant, waterproof, or soft-soled shoes.
3.4.4 Goggles may include impact-resistant glasses, heat-resistant mirrors, UV-blocking lenses, sunglasses, or other appropriate eye protection.
3.4.5 Workers performing tasks over two meters high must be issued safety helmets and harnesses.
3.5 The design of protective clothing must meet safety standards, be convenient to wear, visually distinct, and not interfere with work performance.
3.6 Cotton protective tops should have tight collars, cuffs, and hems, with a full face cover and a lapel. Underwear should be in a trouser style with an additional pant cover.
3.7 Protective shoes are primarily deep-leather boots, but in certain low-risk environments, flat, short-waist leather shoes may be used.
3.8 All purchased PPE must meet national technical standards and be produced by state-designated manufacturers, with a "qualified product" label.
4. **Distribution of Labor Protection Supplies**
4.1 PPE is essential for preventing injuries and occupational hazards, ensuring employee safety and health. It must be distributed during working hours and should not be considered part of general welfare benefits.
4.2 **Cost Standards for Protective Equipment**
4.2.1 Special work: 550 yuan/year
4.2.2 General work: 400 yuan/year
4.3 **Scope and Standards for Labor Insurance Distribution**
4.3.1 Scope: Includes items like gloves, towels, soap, masks, goggles, etc. Each unit issues relevant supplies based on its construction characteristics and job type.
4.3.2 Standard:
a. Company agencies, service units, and communications departments: 5 yuan/month per person.
b. Construction branches, project teams, and regional offices: 10 yuan/person/month.
c. Small labor insurance is issued quarterly to ensure occupational health.
4.3.3 Purchase and Issuance:
a. Units report needs to the procurement center, which handles purchases and distribution.
b. For construction subsidiaries and regional branches, after approval from the Quality and Safety Department, the material procurement office may authorize local purchase.
4.4 **Scope and Standards for Labor Insurance Distribution**
4.4.1 **Scope and Style**
a. Construction branches and project departments: Includes single-duty clothes, shoes, hats, cotton uniforms, raincoats, etc. Clothing styles and logos must follow company culture and be customized.
b. Communication and service units: Includes similar items, with same customization requirements.
c. Office uniforms: Summer includes light shirts and blue trousers; spring/autumn includes blue suits.
4.4.2 **Standard:**
a. All units must follow the "Standards for Personal Protective Equipment Release" and issue according to schedule.
b. Special cases require approval from the Quality and Safety Department.
4.4.3 **Purchase and Distribution:**
a. After approval, the procurement office distributes the items.
b. If an employee is away from work for more than six months, PPE is suspended and extended upon return.
c. Long-term loaned, hospitalized, or retired staff will no longer receive PPE.
d. In cold regions, local standards may apply.
e. In mosquito-prone areas, appropriate insect control items must be issued.
**Copyright Notice:** The content presented here is either original or reproduced from various sources. Opinions expressed do not reflect those of China Labor Insurance Network. The site does not assume responsibility for accuracy, reliability, or completeness of the content. If you believe any content infringes your rights, please contact us immediately.
More info about PCR Tubes:
What Are PCR Tubes?
PCR tubes are small tubes made of high-quality virgin polypropylene with a conical bottom. They have uniform thin walls to facilitate efficient heat transfer to the sample. These tubes are autoclavable and work well with most thermal cyclers.
What Are the Applications of PCR Tubes?
The most common application of PCR tubes includes various molecular biology biochemistry experiments requiring real-time PCR (Polymerase Chain Reaction). As these tubes have ultra-thin walls, they are perfect for accurate and steady thermal transfer in an array of thermocyclers. Our thin-wall PCR tubes meet the protocols required for PCR, qPCR, reverse transcriptions, and a variety of other applications.
Autoclavable and Universally Compatible PCR Tubes
Ensuring efficient and uniform heat transfer becomes a lot easier with our range of PCR tubes. Thanks to our advanced molding technology, Yongyue Medical can offer you high-quality and uniformly thin-wall PCR tubes at the most competitive prices.
These sterile PCR tubes come with a leakage-proof snap-cap. It allows you to prevent evaporation during the reaction, ensuring accurate results. We use only virgin polypropylene to manufacture the following types of PCR strip tubes.
Types of PCR Reaction Tubes We Offer:
- 0.2ml PCR Tube Flat Cap
More info about PCR Tubes:
What Are PCR Tubes?
PCR tubes are small tubes made of high-quality virgin polypropylene with a conical bottom. They have uniform thin walls to facilitate efficient heat transfer to the sample. These tubes are autoclavable and work well with most thermal cyclers.
What Are the Applications of PCR Tubes?
The most common application of PCR tubes includes various molecular biology biochemistry experiments requiring real-time PCR (Polymerase Chain Reaction). As these tubes have ultra-thin walls, they are perfect for accurate and steady thermal transfer in an array of thermocyclers. Our thin-wall PCR tubes meet the protocols required for PCR, qPCR, reverse transcriptions, and a variety of other applications.
0.2 ml PCR Tubes,PCR Tube Volume,Sterile PCR Tubes,PCR Test Tube,Real Time PCR Tube
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yonyue.com