Smart lock touch screen failure how to do touch screen smart fingerprint lock no response solution
Smart lock touch screen failure how to do? Fingerprint lock touch screen does not respond how to solve? In smart door locks, touch screens have gradually replaced physical buttons as mainstream configurations. The panels of smart locks, password locks and fingerprint door locks have been changed from physical keys to touch screens. It can be said that the touch screen has become the standard of smart locks. In our daily use, we will always encounter some situations, such as touch screen failure, no response, or unresponsive, how to solve it?
In smart door locks, most touch screens are used. The basic configuration is the capacitive screen. The capacitive screen will experience drift, malfunction, etc. If you do not meet this type of situation, you can solve it by the characteristics of the capacitive screen:
Smart fingerprint door lock touch screen failure solutionOne, hardware damage, serious screen damage, you can contact the after-sales maintenance change screen.
Second, the screen is drifting. The smart lock screen is blown with a hair dryer, and the mid-range wind speed is set to evenly heat the screen. After the screen is hot, it can return to normal. (usually caused by humid environment)
Third, use transparent glue to paste on the smart lock screen - tear it apart and perform repeated operations until the touch returns to normal.
Fourth, through the electrostatic shock screen, such as the electrostatic device of the lighter, covering the defective part with a wet paper towel, by changing the electric field can restore part of the failure, this method may not be effective.
Fifth, release the screen static electricity, wipe through the fur, or use an alcohol swab to release or neutralize static electricity.
Sixth, fingers wet, sweat, it is recommended to dry your fingers and try again.
Seventh, the screen has dust or dirt, etc. The influence of the touch reaction barrier needs to be cleared before operation.
Eight, by restoring the factory setting operation, if a variety of methods are invalid, you can try to restore the initial state.
Nine, the above methods are invalid, can check the wiring, this method is recommended for the user proficient in the circuit, do not recommend the average consumer to try, ordinary users can contact after-sales or professional maintenance personnel.
Ten, it is recommended to contact the manufacturer after sales if it can not return to normal.
The above is a smart lock China network Xiaobian finishing smart lock touch screen failure solution, welcome to share with us to share, more smart lock knowledge, please pay attention to the site related articles!
Color coated steel plate:
Color-coated steel plates are a new type of construction materials which is rapidly emerged in the international market in recent years. It is refined by chemical treatment, initial coating, fine coating and other processes on the continuous group. The coating quality is far more uniform, stable and ideal than the quality of single-piece spraying or brushing on the surface of the shaped metal.
The color-coated steel plate has excellent decoration, formability, corrosion resistance, strong coating adhesion, and can maintain novel color for a long time. Because color-coated steel plate can replace wood, it has good economic effects such as high-efficiency construction, energy saving, pollution prevention,it has become an ideal construction material nowadays.
Galvanized Steel Coil,Galvanized Steel Accessories,Zinc Aluminium Roofing Coils,Galvanized Steel Coil
Shandong Hengfeng Group , https://www.luhengfeng.com