Buy plastic steel doors and windows to keep in mind four key points

How can you easily buy the most desirable steel doors and windows when you are doing home improvement? The following are four key points for professionals to explain their knowledge of purchasing steel doors and windows, so that we can use the field when buying plastic steel doors and windows.

Baoshi doors and windows and sun room     Daikin Air Conditioning

The first is solid, and steel doors, windows, frames, and four corners are usually welded. The average angular strength required by the national standard must reach 3000N or more. In this regard, there is a need for regular welding equipment to ensure that there are no guarantees for small processing shops along the road. The other is that the connectors and fasteners should be solid, because the main material of the plastic window is PVC, and the wall thickness of its section is usually about 2.3mm, and it cannot withstand the hardware such as hinged window hinges. They need to have sufficient thickness of steel lining support inside, so before buying it is necessary to carefully observe the existence of a small amount of pounds or the possibility of cutting corners, the door and window after the finished product is not easy to check the thickness of the internal steel liner.

The other is flatness, which includes the fact that the welding angle cannot be misaligned and the two windows cannot be uneven. This is mainly reflected in appearance, and it is also an important item that brings beauty to our vision. In the national standard, there are also concrete examples, such as: the difference between the height of the welding angle should be in the range of 0.3mm. It doesn't matter if you don't understand the national standard, but you have to look at his sample window and then ask for the quality of the appearance. The quality of the sample displayed by the average merchant is still OK.

The third is accurate, mainly reflected in the accuracy of the size. It includes the size of the actual measurement of the hole and the size of the fan and frame after installation. Inaccuracy of the size often affects the opening of doors and windows and the sealing of doors and windows.

The user can simply know that the ordinary door and window frame and the fan overlap are generally 8-10mm. If the size is too small (such as 4-5mm), the sealing performance is questionable.

The fourth is the sealing performance. The dimensions mentioned above will affect the seal. If the manufacturer purchases the unqualified accessories, it will affect the seal. For example, inferior rubber bands used by some manufacturers will shrink within six months, resulting in a large gap between the glass and the fan. Rain and air can easily enter the room.

Doors, Doors, Doors, Windows, Doors, Interior, Glass Doors, Glass Doors

Flow Calibration Column is widely used in the flow calibration of metering pump and dosing device, which can accurately calibrate the output flow of metering pump. Major Material: Plexiglass, transparent PVC and stainless steel; Connection methods have internal thread, external thread, flange.

Flow Calibration Column

UPVC Flow Calibration Column,PVDF Flow Calibration Column,Plastic Flow Calibration Column,Transparent Flow Calibration Column

Ningbo RMI Plastic Co., Ltd. , http://www.rmiplast.com