Winter furniture maintenance does not need to give you a good gift

Many people will ignore a problem, that is, winter furniture maintenance. Maybe you will feel strange, why pay special attention to furniture maintenance in winter? In fact, it is very simple, because the winter climate itself is dry and cold, coupled with people's heating, resulting in very low air humidity, causing furniture cracks. So what is the winter furniture maintenance method? The following is a small series to answer your questions.

Winter furniture maintenance method 1: Maintain indoor humidity

Humidity is a top priority in winter furniture maintenance. We already know that the cold in the winter causes the air moisture to decrease, and the heating of the heating equipment, the furniture in the home is more likely to crack, and even faded, so humidity is the key to furniture maintenance. Maybe you will think, then I can't do it. I have pointed out in the industry that humidification is right, but it should be moderate. The hygroscopic properties of wood are easily affected by the environment, so it is best to evenly humidify, and the humidifier should be placed in a ventilated place, but not close to the furniture, because the wood absorbs moisture and swells, it also causes cracking and mildew. It is generally preferred to control the air humidity to 40% - 60%.

Winter furniture maintenance method 2: furniture cleaning skills. Do not use small dust to damage the furniture, it is said that the life of many wooden furniture is mainly affected by dust. If there are furniture made of high-grade wood such as mahogany, oak and teak, the exquisite carving decoration is definitely indispensable. It is precisely these fine places that are easy to accumulate dust. If it cannot be cleaned frequently, it will speed up the aging of wooden furniture.

But be careful when cleaning, try not to use hard cleaning tools, otherwise it is easy to scratch the furniture. Because of the dry climate in winter and the baking of heating, the moisture loss of the furniture is severe and the texture becomes loose. Do not use wet tissue when wiping the furniture with a soft cloth. Instead, use special furniture to care for essential oils. In order to better lock the moisture in the wood, prevent deformation, and also extend the life of the furniture.

Winter furniture maintenance method three: reduce the window opening time

Many people have such a wrong understanding that the indoor temperature is high, and windows should be opened to keep the furniture ventilated to prevent furniture cracking. In fact, the higher the indoor temperature, the more water content in the air saturation state. In other words, the indoor humidity is higher than the outdoor temperature. The real cause of cracks in furniture is humidity rather than temperature. So when you open the window, you exchange the cold air outside to make the room dry. Therefore, ventilation should be reduced during the winter, which is the correct way to maintain the furniture.

More furniture maintenance methods are available at http://

Natural Veneer is a thin sheet of wood, rotary cut, sliced or sawed from expensive natural wood. The Veneer is easy to be edge jointed and overlaid on Plywood , MDF, particleboard and so on. So, it can be used in fancy plywood, fancy MDF, fancy Blockboard and veneer faced particleboard.

Luli Group Co., Ltd, also supply engineered wood veneers with good quality and competitive pricing.

Advantages of using Natural veneers:

Compared to wood, one of the primary advantages of using veneer is stability. While solid wood can be prone to warping and splitting, because veneer is made of thin layers of wood glued together, the chances of splitting or cracking are reduced. Further, the glue used provides additional strength, making the end result stronger than natural wood.And we have Professional Natural Veneer and Natural Wood Veneer.

Usages of Natural Veneer:

Used to cover the surface of plywood, MDF, chipboard, blockboard and so on.

Specification details:

Sizes: 1220mm x 2440mm, 1250mm x 2500mm or as your request

Thickness: From 0.15mm to 0.6mm or as per request

Species: Okoume, Bintangor, Terminalia, Red hardwood, etc.

Grade available: A/A, A/B, B/B

Cutting way: Rotary cutting

Natural Veneer

Natural Veneer,Natural Walnut Wood Veneer,Professional Natural Veneer,Natural Wood Veneer

Luli Group Co.,Ltd. , https://www.plywoods.nl