Tuo Cheng Leng Nuan tells you the "good" and "bad" floor heating

Tuo Cheng Leng Nuan tells you:

Floor heating is very common in life, it can heat the entire floor and increase the internal temperature. So what are the advantages and disadvantages of floor heating installation?

1. Floor heating installation-advantages

1. The floor heating installation is healthy and comfortable: it can provide heat, and the temperature of the floor inside the house is uniform. As the saying goes, "people warm themselves with warm feet", the scientific heating equipment that heats each floor provides people with a comfortable warmth In addition, there will be no turbidity in the air convection, which will cause the air in the house to be cleaned.

2. Floor heating installation saves space: no heating radiator is needed to increase the area of ​​use, making the room beautiful and clean.

3. Energy saving: The heating method of floor heating has high efficiency and small heat transfer loss. Compared with other heating equipment, it saves 20% and costs 20%.

4. Good thermal stability: aluminum foil layer soil and soil energy storage, thermal stability can be very good, although it can still maintain the stability of the indoor temperature during the interval.

2. Floor heating installation-disadvantages

1. There is a blind spot in the floor heating installation and use space: the floor heating pipe is very complicated, and the small use space is limited, because the coil is placed to be waterproof, and the room temperature is a small space that is difficult to meet the heating standard.

2. After 2 ~ 4 years of floor heating, the pipeline is easy to be scaled up, professional equipment needs to be cleaned, and scale will affect the heating effect.

3. The height of the layer is occupied. The heating insulation board of the floor is 30 mm, the filling layer is 50 mm, and the total thickness is 80 mm, which has an effect on the height of the layer.

3. Precautions for floor heating installation

1. The floor heating system must be verified before installation.

2. The installation of the floor should be dry, the indoor temperature should not be too large, and the ambient humidity should be about 60 degrees before and after.

3. Do not nail the floor heating before and after construction to avoid damage to the heating coil.

4. In order to isolate the moisture and let the moisture be released from the socket, the composite film should be placed before placing the composite floor.

5. The keel cannot be placed, which will affect the heat dissipation effect and may damage the pipeline.

6. Use a thicker base than the floor, and leave enough expansion joints between the floors.

7. Floor heating should be installed and preheated after 24 hours.

The above content is provided by Tuocheng Cooling and Heating . To find a good floor heating, choose Tuocheng Heating and Cooling !

PP Flame Retardant Sheets

Twin Wall Polypropylene Sheet,Blue Polypropylene Sheet,Coloured Polypropylene Sheet,Transparent Polypropylene Sheet

Heshan Liantuo Engineering Plastic Co.,Ltd , https://www.liantuoplastic.com