Wall decoration base treatment is a key three steps to create a good home face
Wall decoration is the focus of home improvement, from the bare brick surface to a beautiful wall, the decoration process to go through more than a dozen processes, and one of the most critical is to do a good job of the primary treatment, otherwise the late paint brush How beautiful it is also difficult to avoid a variety of repair problems. In this issue, Xiaobian will tell you in detail how to deal with the basic decoration of the wall decoration. Let's understand it together.
| The grassroots do not do a good job |
Many users think that when the wall surface is a problem, it is because of the weather and the use of time. In fact, more problems can be avoided by paying more attention to the early construction.
1, the film wrinkling foaming
Some users will find that after the film is formed into a film, the surface is uneven and wrinkled, even with sand grains or small bubbles. The main reasons for this phenomenon are: the wall is not cleaned in the front, the paint is too much pigment in the paint. The particles are too thick, the ambient temperature is low during the early deployment of paint, etc.
2, the wall sweating moldy
During the wet season, sweating, fogging and mildew on the surface of the wall surface are largely caused by insufficient waterproof work and insufficient adhesion when the base layer is processed; on the other hand, the wall insulation may not be done well. Under the condition of uneven heat and heat, the wall surface will form condensation and mold.
3, cracking the wall
Cracking is also one of the common problems in the wall, involving the reinforcement of the front wall and the selection of the primer. For example, the primer and topcoat do not match, and the primer layer does not dry out.
Wall construction
Acid etched decorative glass is produced by acid etching the glass to form an obscure and smooth surface, and use silk screen, coated titanium, and coated mirror, etc. to produce different style. Silk-Screen printing Glass is also called Colored ceramic fritted glass/ Enamel glass/ Silk screen printed glass, etc. It is produced by applying a thin layer of ceramic paint onto the glass surface by adopting silk-screen printing process. Then to dry the coating and temper the glass with ceramic paint incorporated into the glass surface so that make sure the color and pattern on glass are durable for long time.
Acid Etched Glass,Etched Glass Windows,Etched Glass Panels For Doors,Etched Glass Panels
Jinan Coton Glass Co., Ltd , https://www.cotonglass.com