Talking about "Precautions for Removal of Imported Bearings"
Home>Bearing knowledge>Talk about "precautions for importing bearings" |
Talking about "Precautions for Removal of Imported Bearings"
/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
The removal of the bearing is divided into rough washing and fine washing; and the metal mesh frame can be placed on the bottom of the used container.
When rough washing; remove the grease or adhesive with a brush on the top of the oil. If you change the bearing in the oil at this moment; be careful to damage the rolling surface due to foreign matter.
During fine washing; gradually change the bearing in the oil; must be carefully carried out.
The general use of the scavenger is neutral non-aqueous diesel or kerosene; occasionally use warm lye, etc. as needed. Regardless of which scavenger is used; always filter and keep clean.
Immediately after eradication; apply anti-rust oil or anti-rust grease to the imported bearings.
Recommend to friends comments close window
Bearing related knowledge |
Front and rear code of Swedish SKF bearing (1) Rolling Bearing Machinery Industry Specification Catalog Why is the KOYO bearing easy to attack the noise of the imported bearing quality? |
This article links to http://
Please indicate China Bearing Network http://
Previous:Accuracy detection and adjustment of SKF imported bearings Next:The effect of sealing ring on dustproof of imported bearings
HHCMS-200 carbon molecular sieves
CMS-200 is a new kind of non-polar adsorbent specially designed for extracting nitrogen-rich gas from air. It is suitable for separating nitrogen from air. It has a high adsorption capacity for oxygen and can separate nitrogen from air.
The most notable feature of the Carbon Molecular Sieve is its high gas-producing efficiency, especially the preparation of nitrogen with a purity of less than 99.5%.
It is widely used in large air nitrogen making equipment.
Project parameters
The diameter of:1.0-1.3 1.3-1.5
Packing density:≥660kg/m³
The intensity of particle:≥95
Compressive strength abrasion:≤1%
The moisture content:≤0.5%
Standard packing:20Kg/barrel. 40Kg/barrel. 130Kg/barrel
The adsorption time of test condition was 58s with an average pressure of 1-2s
Adsorption pressure |
Nitrogen purity (%) |
Yield (Nm3/ h.t.) |
Nitrogen recovery rate |
0.8MPa |
99.9 |
120 |
30 |
99.5 |
200 |
37 |
|
99 |
250 |
41 |
|
98 |
310 |
45 |
|
97 |
370 |
47 |
|
96 |
420 |
50 |
|
95 |
490 |
55 |
|
0.6MPa |
99.9 |
95 |
31 |
99.5 |
160 |
38 |
|
99 |
200 |
43 |
|
98 |
245 |
46 |
|
97 |
300 |
49 |
|
96 |
335 |
51 |
|
95 |
390 |
56 |
Pay attention to
1. The nitrogen production equipment can reduce the adsorption temperature to better show its excellent nitrogen production performance under conditions;
2. Pay attention to low temperature drying and seal preservation during storage;
Black Strip Molecular Sieve Hhcms-200
Black Strip Molecular Sieve Hhcms-200,Black Strip Molecular Sieve,Adsorbent Carbon Molecular Sieve,Black Carbon Molecular Sieve
Zhejiang Changxing Haihua Chemical Co.,Ltd. , https://www.zjcxhhcms.com