Ministry of Health announced *** iodine content of national standard: no more than 30 mg per kilogram

Ministry of Health announced *** iodine content of national standard: no more than 30 mg per kilogram New standard for iodine content per kilogram does not exceed 30 milligrams. A preliminary report will be implemented on March 15 next year. According to the Ministry of Health website, the Ministry of Health recently issued an announcement to publicize the national standard for food safety, "Iodine Content." The standard is clear, after adding iodine fortifier in ***, the average level of iodine content (in terms of iodine) of *** product (**) is 20-30mg/kg. The standard will be implemented on March 15, 2012.

The standard states that food fortifiers added in *** include potassium iodate, potassium iodide, and algae iodine. According to Article 8 of Chapter II of the "Regulations on the Management of Iodine Deficiency from Iodine by Salt," (State Council of the People's Republic of China Order No. 163), potassium iodate is mainly used.

Standard introduction, after adding iodine fortifier in ***, the average level of iodine content (in terms of iodine) of *** product (**) is 20-30mg/kg. *** The allowable fluctuation range of iodine content is ± 30% of the specified average *** iodine content. The health administrative departments of the people's governments of provinces, autonomous regions, and municipalities directly under the Central Government shall, within the prescribed scope, select the average level of iodine content appropriate to the local conditions according to the actual iodine nutrition level of the local population.

This national standard has reduced the average level of iodine content in ***. Previously, according to the "Summary of the Food Hygiene Enhancer Use Hygiene Standard" No. 1, the salt iodine fortification amount was 20-60 mg/kg.

The draft of the “*** Iodine Content” was released in July 2010. According to the preparation of the draft, the current level of iodine in salt is relatively high. Although the national level is at an acceptable level, about 5 provinces are in excess levels and 16 provinces are above the appropriate level, so there is room for downward adjustment. In the 10 years after the implementation of salt iodization, excessive iodine can increase the risk of hyperthyroidism; make hidden thyroid autoimmune diseases become dominant diseases; long-term iodine excess can reduce the risk of hypothyroidism or subclinical hypothyroidism Increased sex.

We are china first and best E1 Glue Waterproof MDF Board Price factory in china, we have 30 years experiences in E1 Glue MDF area.If you interested our E1 Glue Moisture-proof MDF ,we will give you a competitive prices.

MDF MR (Moisture Resistant) is a highly moisture resistant Medium Density Fibreboard, suitable for use in areas of high humidity, or where accidental wetting may occur.


APPLICATIONS: Medium Density Fibreboard or MDF (Standard) is recommended for interior applications which may include: kitchen cupboards, bathroom vanities, laundry cupboards, shelving, wall lining (if installed wth a suitable feature joining system) and mouldings.


NOTE: MDF (MR) is not designed for exterior applications.


BENDING PROPERTIES: MDF (Standard) can be bent to produce curves for furniture, doorways and/other applications to a minimum radius of 50 times the panel thickness. 


  • Depth: 18 mm
  • Structural: No
  • Interior or Exterior Use: Interior
  • Moisture Resistant: Yes
  • Fire Retardant: No
  • Length: 2440 mm
  • Width: 1220 mm
  • Certifications Met: EN 622-5
  • Weight: 26.791 kg
  • Application: Furniture,General DIY
  • Type: Board
  • Brand Name: FUSHI
Waterproof Mdf Board Price(Medium Density Fibre) board is a commonly used Particle Board. Moisture Resistant MDF is used in places with high humidity levels. In comparison to standard MDF, Moisture Resistant MDF (or MR MDF) contains a moisture-repellent resin which gives it a better moisture resistant rating. However, MR MDF shouldn't be mistaken to be water resistant as it's still prone to swelling and warping if in direct contact with such elements. 


Waterproof Mdf Board Price
Moisture Resistant MDF can be used in places such as; kitchens, bathrooms, boiler rooms and laundry rooms. Its moisture-repellent properties lend it advancement above standard MDF material. Can be cut, moulded and manipulated using industrial power tools or general hand and power tools. Making sure that all edges are sanded smooth after cutting will provide a clean and smooth finish when applying paints. Doing so prevents any harmful fibres being released from the board. In terms of fixings, screws and biscuit dimensions should be taken into consideration, in order to maintain a clean finish.
Waterproof Mdf Board Price
MDF is made from recycled offcuts, sawdust, wood chippings and from trees not suitable for other uses. Different manufacturers list how much recycled material goes into their products. MDF is considered a green product and environmentally friendly.
Waterproof Mdf Board Price
Correct PPE should always be used when using MDF. Its harmful fibres are known to cause health issues so goggles and dust masks are required. A respirator with a P2 Filter rating should be considered compared to a disposable dust mask. It is recommended that any cutting is undertaken in a well-ventilated area.


Unit Of Sale

Each

Size

1220mm x 2440mm

Barcode

N/A

EDP code

MDFMR9

Brand

Fushi


E1MM Waterproof Mdf Board Price


E1MM Waterproof Mdf Board Price


E1MM Waterproof Mdf Board Price


E1MM Waterproof Mdf Board Price

Waterproof Mdf Board Price

LVL Plywood Packing


Ribbed Birch Plywood

Moisture-proof Mdf Board

18mm Moisture-proof Mdf ,Moisture-proof Mdf Board, MDF

Fushi Wood Group , http://www.fushiplywood.com