Life knowledge: daily care and use precautions for solid wood furniture
1. When it comes to maintaining solid wood furniture, always start by gently dusting the surface with a soft cloth following the grain of the wood. Before dusting, make sure the cloth is slightly damp but not overly wet. Avoid using harsh chemicals, as they can harm the protective finish. Since these pieces are made from natural materials, they are prone to damage. Be cautious during use—avoid collisions or impacts, and refrain from dragging or sliding objects across the surface. Placing heavy items for extended periods can lead to scratches or pressure marks.
2. In environments with low humidity, consider adding moisture to the air. This can be achieved by wiping your furniture with a lightly dampened soft cloth or using a humidifier indoors.
3. Regularly apply a protective layer of wax to your solid wood furniture. Every 6 to 12 months, use a paste wax to coat the furniture. Prior to waxing, ensure you remove any old wax residue using a mild, non-alkaline soap solution.
4. To protect your dining tables, always place a heat-resistant mat underneath hot dishes. This prevents spills from food and drinks, as well as high temperatures, from damaging the surface.
5. Avoid exposing your furniture to corrosive substances like alcohol, nail polish, or similar liquids. These can cause significant harm to the finish.
6. Keep the room well-ventilated to prevent moisture buildup, which could lead to mold growth on your furniture.
7. Avoid placing your furniture directly in the path of direct sunlight or in excessively dry areas. Excessive sun exposure or dryness can cause the wood to crack or warp over time.
8. For tall furniture like wardrobes and bookcases, avoid stacking heavy objects on top. This can lead to deformation, tipping, or gaps forming at the joints, making doors difficult to close properly.
While taking care of your solid wood furniture may require some effort, these simple steps will help preserve their beauty and longevity for years to come. Whether you're dealing with a dining table, a wardrobe, or a sideboard, these tips will ensure your pieces remain in excellent condition.Zhejiang Sealand Technology Co., Ltd.is a trustworthy supplier of Oil Mass Flow Meter, Oil Mass Flowmeter, Oil Coriolis Flow Meter, Oil Coriolis Flowmeter, Oil Coriolis Flow Meter, ATEX, IECEx & CE approved.
Operating Environment
Atmospheric pressure: 85kPa~106kPa
Ambient temp.: Refer to Chapter 1.6
Relative humidity: 5%~95%, non condensing
Operating conditions
Fluid: Liquid/Gas
Fluid temperature: -200°C~+200°C (higher temp. model is customizable)
Nominal pressure: 4MPa or 25MPa (Customizable)
Supply voltage: AC 85~265VAC, 50/60Hz or DC 12~24VDC(±5%), 5W
Outputs: Pulse 0~10KHz, RS-485, 4-20mA & HART (optional)
The meter consists of mass flow sensor and transmitter. Mass flow sensor is a phase-sensitive resonant sensor based on Coriolis effect, composed of vibration tube, signal detector, concussion driver, structural support, shell, etc.
Mass flow transmitter is a micro-programming-centered electronic system, which supplies
thrust to sensor, transforms sensor signal into mass flow signal & others, and improves
accuracy in accordance with temperature parameter.
It`s composed of switching power supplier, guard grating, core processor board, display
module, etc., installed in a ex-proof junction box. Switching power supply offers power for
transmitter; safe grating isolates sensor and transmitter intrinsically; core processor detects
& processes sensor phase signal, sends mass flow signal and process communication.
Oil Mass Flow Meter, Oil Mass Flowmeter, Oil Coriolis Flow Meter, Oil Coriolis Flowmeter, Oil Coriolis Flow Meter
Zhejiang Sealand Technology Co., Ltd. , https://www.sealandflowmeter.com