Three major tasks and three major points at the scene

When the contract is signed, construction will begin. However, there is another issue that needs to be emphasized on the spot. Do you know who is required to be present at the end of the match? Do you know the textual formalities? In fact, in the whole process of home decoration, the scene is the first step after the signing of the home improvement contract, and it is also the most critical step in all subsequent steps. It has three tasks and three major points, but also reflects the role of home improvement supervision. However, we have found that both decorating companies and consumers attach great importance to this step, but due to insufficient attention to some places that should be taken seriously, they often Bring many disputes later.

>>> Matters needing attention when finishing work

The personnel on the scene must complete

The customer, the designer, the project supervisor and the person in charge of construction shall participate in the four parties' participation. When reaching the bottom, they shall all arrive at the construction site. The designer shall explain the construction process to the person in charge of the construction and the project management personnel in detail, and the places to pay attention to, and shall be supervised by the project. Coordinating the various procedures.

Site formalities

In the previous renovation classroom, the author repeatedly emphasized that both parties to the contract should put an end to verbal agreements, and all clear contract terms must be clearly stated in writing. Here, the author introduces the textual expression of the scene.

First, the equipment needed at the construction site. In this regard, both sides of the contract should use the text to describe the quantity, quality, and protection requirements of these devices.

Secondly, there are problems at the scene, such as the discovery of clogging in the bathroom, problems with the TV antenna signal, damage to door locks with anti-theft functions, and so on. Both parties need to sign and confirm.

Third, about on-site production or confirmation of special practices. This kind of work is absolutely necessary for every type of work for home decoration, such as the modeling of joinery for woodworking; the position of the waistline when the tile is pasted on the tile, how many times the oil paint is applied, and how the electric line is switched off. How many outlets, where, whether plumbers need to change the direction of the upper and lower water, whether the sanitary ware needs to be displaced and so on. Words can be expressed clearly. If it is difficult to express clearly in words, you need to make more in-depth explanations by using descriptive sketches or formal drawings.

Fourth, the parties A and B of the contract should make it clear that the written consensus reached at the scene is the same legal effect as the contractual document and the home improvement contract. It must be observed by the contracting parties during construction and subsequent contract execution.

Three things on the spot

The first job of the decoration company's designers, consumers, and related personnel of the construction team to begin on-site delivery is to confirm which items or equipment on the site need to be retained.

One such incident occurred in a home improvement company in Beijing. The company renovated a house for the owner. The construction quality was very satisfactory and the owner was full of praise. However, there was a problem that caused disputes between the parties to the contract when it was settled. The owner said that the original cabinets in the kitchen reserved for themselves, but now it is gone. The decorating company said that it was too uncoordinated to look at the cabinets and the furnishings in the house, so the set of cabinets was treated as garbage. The dispute between the two parties was not resolved. Finally, the decoration company made concessions on the project money to solve the problem. In fact, after careful investigation, when the two parties to the contract reached the end of the scene, failing to make clear the equipment that should be retained was the real cause of the dispute.

The second job that should be performed at the scene is to check the existing problems on the site. At present, most of the houses we encounter are rough houses. Therefore, it is not surprising that these houses have such problems. However, if there is no judgment on the location of the problem before the construction team enters the construction site, it may be later. There are problems in these areas.

There was such a thing: When a home improvement project was accepted, it was found that the toilet was not drained properly, and the reason was that the original water pipe was blocked by debris. The management company of the decoration company said that there was this problem when entering the venue. However, because there was no strict inspection of the key parts of the house at that time, there would of course be no proof of the text. Then it was too late to mention anything. Decoration companies can only take responsibility for this in their own right.

All right! At this time, we should start the third job on the spot, which is what most people understand in the current home improvement project. What should this job do?

At the scene, pay close attention to three major points

The first point on the spot: Confirm all project items.

Most of the home renovation projects are relatively small, so for the sake of simplicity both sides of the contract will have a lot of verbal promises during negotiations, such as the verbal confirmation of the designer for some project practices or materials; for example, the owner promises that if the decoration company makes the project a good job, How many projects do the Other party introduce? Such commitments can be divided into two categories. One is that both sides of the contract are not serious and they all talk about it as a joke. This type of promise will not be mentioned after the signing of the contract; the other is the contract Very serious, but the time of negotiation may be due to feelings or believe in each other, not written in the contract, but should be honored during the implementation of the contract, such oral terms, if the other party because of forgetting or missing the information transfer is not honored The cooperation between the two sides will leave a shadow.

Therefore, when contracting the project at the construction site, both sides of the contract must confirm all project items, including verbal ones.

The second point on the spot: Confirm the process.

We know that most of the current drawings for home decoration are relatively simple. The main reason is that the project is too small. If it is done in too great detail, the design cost is often difficult for both parties to accept. Therefore, one of the important tasks on the spot is how to do the project? Use the mouth of the designer and the consumer to make it clear; use the designer's pen to draw it out on the scene and mark it clearly. For example: For a wall paint, designers and consumers should be clear on the construction site: how to deal with the basics of the wall, cracks to solve the problem, scrape putty times, brush wall paint several times and so on. It's not enough to just say brushing Nippon Paint.

The third point on the spot: Confirm all decorative materials.

Now, whether it is consumers or the news media, one of the feelings of the home improvement industry is that the phenomenon of cutting corners is serious. Therefore, the third point is to explain the materials purchased by Party A and Party B on the spot.

Some people may ask that cutting corners are decoration companies. Why should the owners buy materials at this time? Because if the owner bought what kind of material or when to buy, the construction party is not clear, the construction of the construction plan or the detailed construction program may have a negative impact. For example, if the construction party does not know what kind of wall tiles the owner buys, it will be difficult for the tile workers to loose the line when they are working, which will affect the construction progress.

In addition, with the help of on-the-spot referencing, it is necessary to clarify the confusing matters and let the contracting parties use this submission to interpret the construction project and the work the two contract parties need to cooperate with. After all the contents have been confirmed at the scene, everything that happens afterwards is beyond the above-mentioned content, and both parties to the contract should negotiate or contract to supplement.

The role of home improvement supervision

Home improvement supervision to explain to the customer what?

Many consumers often ask these “supervisors” to explain some of the construction details when dealing with home decoration technology consulting agencies and decoration company “supervisor” personnel. To this end, some home improvement companies require service personnel to explain to the head of the household technical details that affect safety or project quality in construction.

First, the home improvement supervisor should help the customer to determine the construction plan (the so-called “technical disclosure”) and clarify the working procedures of the construction team. For some customers do not understand the matter, they will remind consumers, such as can not arbitrarily change the original housing structure, and put forward their own views on the overall effect of the customer's room. In addition, the supervisor must assist the customer in fulfilling their requirements, help the constructors to arrange the work order, complete the designer’s intentions, prepare various requirements for entry and relevant formalities, and specify the size and location of the drawings. Because the customer does not understand the material quality and the specification level, the home improvement supervisor is required to check the materials on the construction site according to the material requirements in the contract. They want to check whether the materials sent to the site by the decoration company are in line with the brands and grades on the contract and help the customer to check the quality of the materials.

In the initial stage of construction, the home improvement supervisor shall explain to the customer the requirements for waterproof construction and circuit construction, and inform the construction party to ask them to notify them when the two projects are completed, and then proceed to the next process after passing the inspection.

For the auxiliary design of the circuit, the supervisor shall take the initiative to tell you that the wall and floor wiring ducts should be rigid PVC pipe, the line pipe and the cable box connection should be applied over the jacket, etc., and the cabling in the ceiling can be used softly. PVC pipe sheathing, wire should be 2.5 square copper strands and so on.

For wood production, the supervisor should tell the customer how to inspect whether the operation of the construction side is located, and remind the household owner to check all the edges of the fixed main keel mounting base plate and the top trim panel, and whether they are sealed by solid wood wire sealing. In addition, the “supervisors” will also tell you about other ways to control the quality of wood: if the spacing of the keel is made according to the process requirements, if the semi-finished products are made to be safe and reliable, what is the quality of the sealed wood strips...

At the end of the wood construction, the Supervisory Committee reminded the customer to deliver the second period. If both sides dispute the quality of the construction, they will also invite the parties to negotiate a settlement, and remind consumers that they can't negotiate while constructing. For the increase or decrease in construction, they will also invite consumers to negotiate and sign contracts in a timely manner.

After the completion of the construction of the wooden furniture, the supervision of the home improvement supervisor must supervise the construction of the floor and the wall: For example, before the construction of the wall and floor tiles, the water is not soaked, the direction of the pattern is not uniform when the construction is completed, the horizontal and vertical alignment of the joints is not complete, and the firmness of the adhesive is Wait.

When all the lamps are installed, the supervisors will remind the user to do the shunt electricity test. This kind of experiment can't use the electricity test directly, apply the "rocking table" test. After confirming safety and reliability, turn on the electricity and test it all the way; the last time all the electricity test, to see whether the total line can bear the required voltage, current, 24 hours without turning off the lights to see if the line bearing capacity is enough.

When the overall project was basically completed, the painter began sanding and painting the wood finishes. At this time, the Supervisory Committee reminded consumers that the painted site was clean and could not lift the soil; each oil decoration should be polished once before it was cleaned. Oiling surface, to ensure the quality of the paint and other technical key. In addition, they will also explain the following technical indicators to you: If there is a seam in the longitudinal direction of the wooden material, the cement mortar shall be applied between the seams and 821 putty, and the inner space between the seams shall be filled with wooden blocks. Support point, then fill with cement slurry.

After the completion of the project, the home improvement supervisor will supervise the on-site cleanup and clean the doors and windows so as to meet the conditions for moving in the furniture. At this time, they will ask the customer to accept the project.

Renovation Start Preparation Porcelain Decorating Children's Room Decorating Home Decoration Decoration Company Renovation Design Paint Home Kitchen Cabinet Door Kitchen Cabinet Door Bathroom Tile Bathroom Door Bathroom Ceiling Material Bathroom Door Size Bathroom Size Bathroom Ceiling Overall Bathroom Toilet Design Toilet Waterproof Bathroom Floor Tile Kitchen Tile Tile Specification

Corollary Equipment

Conveyor,Crusher,Other Corollary Equipment

Tang Shan Jin Zhi Science & Technology Co.,Ltd. , http://www.jzgasifier.com