Preventing Heating Hidden Trouble Changing Heating to Avoid 4 Major Vices

Want to make home warm and comfortable, in the end how to change the heating? What are the cures or bad habits in the heating process? In this regard, experts said that if you want to maintain the best working condition of the heating, heating materials, installation location, the number of purchases can not be sloppy.

The material mixes the position to change the quantity to be free

Home heating is not warm, after the temperature does not come after conversion, indoor temperature is too high to cause discomfort, every winter, home heating problems will show up, if you want to properly solve is not easy. In the interview, the author found that consumers face a lot of blind spots in the face of technical problems in the face of the lack of technical content, but the need for some professional knowledge of the radiator purchase and installation; and business sales staff lack expertise, service is not in place, not rigorous Problems such as the majority of consumers planted hidden dangers of heating.

Modified heating is best "original material" "original position"

With the appearance of new radiators for various materials, shapes and colors, replacing the “ugly heating” in the house has become a compulsory course for most people in winter. However, experts said that the conversion of heating can be as simple as imagined, if you want to be foolproof, you must put a good radiator material, installation location and the required number of three.

The material is the same as the original radiator. Steel, cast iron, copper-aluminum compound, what kind of material radiator is most suitable for their own district heating system, can guarantee the heating efficiency has been a headache for consumers. Industry experts said that if the radiator material does not match the residential heating system will affect its cooling function, so according to their own district heating system to buy a radiator is very important. Asking the property and asking the radiator brand professionals to come to the door is feasible, but the conclusions they give are somewhat likely to be inaccurate. Therefore, the easiest way is to see the material when disassembling the original radiator, and then follow the cat's paintings. Material, naturally no problem.

The location is as same as the original radiator. For aesthetic reasons and space saving, radiators are installed in various locations, but their efficiency is greatly reduced. For this, experts hope that consumers can trust and respect the hard work of professionals. In fact, the location of the original radiator installation is based on the design of each house's structure, area, orientation and degree of insulation. It is not installed arbitrarily. This may lack aesthetics and waste some space, but it can Make sure your home is warm and comfortable. Therefore, it is recommended that you choose the location of the original radiator or its left and right sides when selecting the installation location.

The quantity is based on the total radiator heat dissipation. How many square meters of the house to buy how many radiators have merchants or sales staff to help count, do not have to worry about themselves, if you pick the product with this mentality out of the problem is not surprising. According to experts, most of the guides for selling radiators on the market are not professional enough. After only short-term training, only one is known. The second is unknown. Simply determining the number of radiators you buy is based on the square meters you report. Because the position, floor, orientation, lighting, and insulation of each home are different, the number of radiators required for an equal-sized home is not exactly the same. Therefore, the best way to determine the purchase amount is to calculate the total heat dissipation (heat load) of the original radiator, that is, to multiply the heat dissipation of the original radiator by the number of slices, and then take this number to divide the sales by New heat sinks each piece of heat, get the final purchase quantity.

Heating is not a minor change

The original heating is unsightly, and the location of the furniture and the lack of temperature may be the reason for your heating. However, heating experts believe that heating is the main reason for the existence of heating. It is not a wise move to seek “aesthetic” heating. If there is a problem with refitting of the heating system, it may lead to imbalances in the district heating system, excessive heat consumption, waste of resources, and problems affecting the service life of the radiator. Smaller ones will affect their own heating, while others will affect heating of the entire building or the entire community.

With the gradual improvement of water quality and heating systems by the relevant national authorities, and the gradual improvement of product appearance and installation positions by developers and radiator manufacturers, the heating temperature and the quality and aesthetics of “original” heating are improving. Therefore, experts recommend that consumers do not need to make minimal changes to the heating.

Radiator is not a real-time product. It is the best use and durability to maximize its function. Therefore, the experts summarized the three good recipes and the four vices. While teaching you how to treat the heating, you also reminded you how to avoid causing the heating to affect the function.

Three good recipes:

1. The partition above the heating produces good convection. When the air in contact with the radiator absorbs heat from the radiator, the temperature rises, the density decreases, and convection occurs with the cold air, which is conducive to indoor circulation. If there is no partition above the radiator, the convective air temperature will rise to the roof, then hover at the top, turn down after cooling, resulting in high temperature at the top of the room and low temperature at the bottom. Therefore, if a partition is placed 15 to 20 cm above the radiator, the heated hot air will flow toward the center of the room under the guidance of the partition, parallel to the person, and make the room temperature uniform.

2. Adjust the temperature appropriately. After heating starts, if the heating is not hot enough, adjust the temperature by putting some gas in place.

3. Often clean and more maintenance. Although the bacteria on the heating are invisible, they will flow to any corner of the room with the hot air. If you want to avoid various diseases caused by the dust bacteria on the heating, it is inevitable that you will be able to do more maintenance.

Four bad habits:

1. A variety of material radiators can cause misalignment. The living room and bedroom are made of good materials, and the kitchen and bathroom are made of common materials. This approach seems to be light and heavy, saving some money, but it will cause hidden dangers in heating. Experts clearly stated that installing different material heat sinks in the same system may cause damage to the inner surface of the light heat sink or damage the protective layer; and different electronic potentials may also cause water leakage; in addition, due to changes in the equipment, there are operational disorders. The hidden danger.

2. Package heating will increase energy consumption. In order to aesthetically package heating is wrong, because the heat is covered after the heat does not come out, not only affect the room temperature, but also makes the radiator inside the water temperature increases and blocks the energy consumption of heating, which reduces the effectiveness of It also increases energy consumption. In addition, the cover also brings safety hazards to the maintenance and repair of heating.

3. The act of “stealing water” affects the life of heating. In remote areas, there is often a practice of giving a lot of water to the heaters for washing, cleaning, etc. This “stealing” behavior not only causes damage to the country, but may also be due to excess oxygen during hydration. The entry affects the life of heating and is not promoted.

4. Improper heating installation location is likely to cause losses. Leather sofas or wooden furniture are not suitable for prolonged heating. People are not suitable for long-term heating. Therefore, do not install radiators near the rest area.

Space Effect Map Villa Design Heating Heating Space Room Furniture Features Sofa Bed Features Sofa Small Bedroom

Monel Bar

Monel 400,Monel 400 Bar,Monel 400 Round Bar

Ningbo Qiyi Precision Metals Co., Ltd. , http://www.qiyi-metal.com