Analysis of oil-water separator for grease trap in catering industry

The grease trap is made of FRP, made of stainless steel and made of carbon steel. Beautiful and practical, high strength, long life, compact structure, small footprint, easy to install and use, it is the ideal equipment for all kinds of hotels, restaurants, high-end guest houses and business restaurants, as well as garage drains for oil cleaning. .

product detailed information

The Wohua brand WHGYQ grease trap developed and produced by our factory is made of FRP, made of stainless steel and made of carbon steel. Beautiful and practical, high strength, long life, compact structure, small footprint, easy to install and use, it is the ideal equipment for all kinds of hotels, restaurants, high-end guest houses and business restaurants, as well as garage drains for oil cleaning. .
Oil separator construction and working principle: FRP grease trap, stainless steel grease trap, carbon steel grease trap
The WHGYQ type oil trap is mainly composed of a flow inlet, a glove box, a partition, a box plate, a cover plate, a flow outlet and a drain cover, and can be roughly divided into two functional areas: a cut-off separation zone and a purification drainage zone.
The interception separation zone mainly intercepts and removes solid impurities (vegetable residue, etc.) in the oily sewage, and gradually separates the oil, sludge, and water by gravity separation; and further separates and treats the treated intermediate water by purifying the drainage zone. Finally, it is filtered and discharged through the drain mask to achieve high purification of oily sewage.
main feature:
1. The equipment is sealed and operated, safe and efficient, automatic operation, no odor leakage, no secondary pollution, and low odor.
2. The oil-water separation efficiency is high, and the oil beads with the oil particle size above 60 μm can be removed; the residence time is short, generally not more than 30 min.
3. The way of entering and leaving water is reasonable. When the water enters and exits the water, there is no impact and unevenness in the water flow, which greatly improves the efficiency of oil-water separation and the smooth effect of sludge settlement.
4. It is not affected by natural cold, the oil in the pool is not frozen, and the operation is continuous.
5, small footprint (processing the same amount of sewage, the area accounts for about 1/4 ~ 1/3 of the advection grease trap); the recovered oil is clean; investment, long life, easy management and maintenance.
Selection method:
1. The selection of WHGYQ type grease trap can be calculated according to the number of daily dining and business area, or calculated according to the water capacity, maximum oil separation and deposition amount. The total number of grease trap designs can be calculated. Designers can The selection table for direct lookup table is as follows. If the parameters in the table do not match the specific engineering design parameters, it will be calculated and determined by a single engineering designer.
2. WHGYQ type grease trap is compact in structure, small in floor space, easy to install and use, can be installed on the ground, semi-underground installation, and can be installed underground. According to the actual situation, the inlet and outlet pipes can be used.
3. All the products produced by our company can be customized according to the requirements of customers.
4, WHGYQ type grease trap has 5 specifications available, see the table below.
Grease trap selection table model specification capacity
(L) Number of people eating / business area per day
(m2) water capacity
(m3/h) maximum oil isolation
(m3/h) Maximum deposition amount (L)
Part of the bottom of the box
WHGYQ-1 130 90~120 90 2.88 2.00 13.30 4.20
WHGYQ-2 200 150~190 150 4.50 3.00 20.50 7.60
WHGYQ-3 500 400~600 400 11.25 5.50 38.30 11.90
WHGYQ-4 800 600~800 600 18.30 9.40 60.20 24.60
WHGYQ-5 2100 800~2000 800 47.90 24.70 158.10 64.60

Welcome to call us 15726364257 0536-8654888

'Analysis of oil-water separator for grease traps in the catering industry

Epoxy Anti-slip Floor paint is a kind of polished cleaning lacquer that closes the base and enhances adhesion.

1. Compressive and impact resistant, high strength and good toughness;

2, the paint film is smooth and textured;

3, slip resistance (high, medium, low)

4, easy to clean, pollution-resistant;

5, thickness 0.5-5mm;

6, the service life: 3-10 years;

Epoxy Anti-slip Floor

Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com