Introduction to the use of electric oil pumps
The electric oil pump is composed of four parts: the pump body, the rectangular oil tank, the pressure handle and the ultra-high pressure steel wire braided hose. The power component of the hydraulic system is used to convert the mechanical energy of the prime mover into the pressure energy of the liquid, and refers to the oil pump in the hydraulic system. It powers the entire hydraulic system. The hydraulic pump is generally constructed in the form of a gear pump, a vane pump and a plunger pump. The hydraulic oil pump connector has three types: straight-through, self-sealing and quick connector. Electric hydraulic pump use: 1. The electro-hydraulic oil pump can be used as a hydraulic pump for various hydraulic instruments. 2. After the electric oil pump and other hydraulic tools are equipped, it can carry out many tasks such as lifting, pressing, bending, bending, straightening, cutting, assembly and disassembly. Reduce labor intensity and improve work efficiency. How to use electro-hydraulic oil pump: When using, open the bleed nut, open the switch on the oil collecting block, plug in the power supply, and put the quick connector on the quick head on the hydraulic device. Press the power switch, wait for the motor to rotate for 1-2 minutes, put the switch off and put it into the boost state. At this time, the output hydraulic oil will carry out various work, and the output hydraulic oil will self-pressurize with the increase of the load to carry out various work until 63MPA . After the work is finished, open the switch to unload. After the hydraulic oil is returned to the oil, remove the quick joint sleeve, screw the bleed nut, remove the electric screw, and close the switch. Role maintenance matters: 1. The oil pump uses No. 20 oil. 2. The oil storage capacity must be within the upper range of the oil window. 3. When refueling and oil change, it must be filtered with oil filter mesh of 80 mesh or more. When replacing, you need to wash the fuel tank. The oil change period is six months. 4. Working oil temperature is 10 degrees Celsius to 50 degrees Celsius. 5. Open the bleed nut before starting the electric pump and open the switch to the unloading position. 6. If the motor temperature is too high during use, it should be stopped. Allow to cool before use. 7. The hydraulic oil pump has been adjusted before leaving the factory, and it is not allowed to be high-profile. When it needs to be re-adjusted, it must be carried out by means of a pressure gauge. 8. The high pressure oil pipe is delivered to the factory and passed the 105MPA test. However, due to the easy aging of the hose, the user needs to check frequently, usually for six months. The vortex flowmeter is frequently used for three months. When the inspection is carried out, the pressure is 87.5MPA. If there is damage, protrusion or leakage, it cannot be used. . 9. The bearing is usually cleaned once every six months, and grease should be added during assembly. Yongjia County Zhengkang Machinery Factory specializes in producing all kinds of electric oil pumps, refueling guns, plastic refueling guns, tanker accessories and other products. Welcome to inquire 0577-67922055 Website: http:// |
Antique Faucet usually adopts pure copper casting, the use of advanced gravity casting process, the precision machinery manufacturing, natural, durable, antioxidant, anti rust spots, in line with international health standards. Some surface water for retro copper plating processing, polished color to vintage effect. Through the use of fine European antique faucet brass casting and become, timeless, acid alkali resistant, anti scratch coating ability outstanding, shiny, easy to peel fade, highlighting the European aristocracy style.
Antique Faucet
Antique Faucet,Brass Antique Faucet,Bathroom Antique Faucet,Antique Mixer Faucet
KaiPing Dongsheng Sanitary Ware Industrial Co.,Ltd. , http://www.dsfaucet.com