• Posted on

Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet

Model NO.: 6061
Alloy: Alloy
Alloy No.: 6061
Tempers: T6
Thickness: 6 _ 300mm
Length: 1000 _ 10000mm
Width: 500 _ 2700mm
Trademark: Signi aluminum
Transport Package: Wooden Pallet
Specification: China Standard
Origin: Henan, China
HS Code: 76061190
Bright Finish 6061 Aluminum Tread Checkered Plate/Sheet

The 6061 T6 aluminum tread plate has the highest corrosion resistance of all the aluminums that have been heat treated. It is an alloy that has been formed with silicon and magnesium. It has a lower strength than other comparable aluminums, but is still widely used. This is partly due to its corrosion resistance and partly due to its excellent mechanical properties. There are a variety of ways you can form 6061 aluminums, such as through machining and welding. The machinability rating of this alloy is 90 percent. It also has great joining capabilities. If needed, this product can be anodized or have other coatings applied. 

 
Available Dimension
  Mill finish Surface Bright finish Surface
Thickness  (mm) 1.00---6.50mm 1.20---6.50mm
Pattern height Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm
  Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm
  Sheet Thickness above 2.0mm,  bar height: 1.50mm Sheet Thickness above 2.0mm,  bar height: 1.50mm
Width (mm) Maximum 1500mm Maximum 1650mm
Length (mm) Maximum 6000mm Maximum 6000mm
Paper interleaves On request for selected On request for selected
Normal size 1200×2400mm, 1219×2438mm,  1219×3048mm 1200×2400mm, 1219×2438mm,  1219×3048mm
 
 Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet
Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet

Bright Finish 6061t6 Aluminum Tread Checkered Plate/SheetBright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet
Chemical composition of aluminum tread checkered plate                                             
Alloy (%) 5052 5083 5086 5754 6061 7075
Si 0.25 0.40 0.40 0.40 0.40_ 0.80 0.40
Fe 0.40 0.40 0.50 0.40 0.70 0.50
Cu 0.10 0.10 0.10 0.10 0.15_ 0.40 1.2_ 2.0
Mn 0.10 0.40_ 1.0 0.20_ 0.7 0.50 0.15 0.30
Mg 2.2_ 2.8 4.0_ 4.9 3.5_ 4.5 2.6_ 3.6 0.8_ 1.2 2.1_ 2.9
Cr 0.15_ 0.35 0.05_ 0.25 0.05_ 0.25 0.30 0.04_ 0.35 0.18_ 0.28
Ni _ _ _ _ _ _
Zn 0.10 0.25 0.25 0.20 0.25 5.1_ 6.1
Ti _ 0.15 0.15 0.15 0.15 0.20
Each (Others) 0.05 0.05 0.05 0.05 0.05 0.05
Total (Others) 0.15 0.10 0.10 0.15 0.15 0.15
Al Remaining Remaining Remaining Remaining Remaining Remaining
Single number indicates maximum content.
 
Packing of aluminum tread checkered plate
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.

Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet
Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet