In recent years, the Roots pump has been developed very fast and has been widely used in many fields such as smelting, petroleum, electronics, chemical, electrician, agriculture and industry. Such products have the advantages of fast start-up, less power consumption and low maintenance cost, the use intensity of Roots pumps is increasing, the problems related to Roots pump failure analysis and troubleshooting, and other related issues have also been heatedly discussed by all walks of life. That Roots pump failure may be what? What are the solutions to these failures? Roots pump failure analysis and solutions Failure phenomenon One: the ultimate pressure failure Failure analysis: 1. Piping, the system leaks; 2. Pre-pump limit pressure drop; 3. Lubricants dirty or model is wrong; 4. Seal Wear and tear; Solution: 1. System Leakage; 2. Overhaul or replacement pump; 3. Exchange of lubricants; 4. Exchanging the seal; Failure phenomenon II: pumping speed failure Analysis: 1. Pipe ventilation capacity is not enough; Pre-pump pumping speed down; Solution: 1. Increase the ventilation capacity of the pipeline; 2. Overhaul or replacement of forepump; Fault phenomenon three: motor overload Failure Analysis: 1. Population pressure is too high; Single-sided contact; 3 front pump back to the Roots pump oil; solution: 1.Expand the front pump exhaust time to reach the inlet pressure; 2 adjust the rotor face clearance; 3 anti-oil return device; Of the three failures is the Roots pump more common phenomenon in the work process, I am fortunate in the work experience of workers, these fault solutions have been well implemented and preserved. However, Roots pump work, it may not only the failure of these problems, when encountered problems, or users need to be based on actual problems to be addressed.
Sandstone Porcelain Tile is made of
natural sandstone and fired at high temperature with inorganic powder. Sandstone Floor Tile creates a unique antique style.
It is impervious
to water, suitable for various spaces such as bathroom, kitchen, living room,
courtyard, shopping mall, etc. It is widely used in commercial and residential
areas.
Performance of Sandstone Look Tile
1.
High-definition inkjet printing that mimics the unique look and texture of
sandstone tiles.
2. The Sandstone Wall Tile is matte effect of the surface
does not cause light pollution due to light reflection.
3. All-ceramic
material, good anti-fouling effect, good pressure and wear resistance.
4. The surface
of Sandstone Tile Outdoor is not easy to absorb
dust, easy to care, easy to clean.
Installation
1. The base
layer is treated, and the paving surface needs to be flat.
2. Install the
seam 1mm-2mm, suitable for wall and floor use.
Sandstone Tile
Sandstone Tile Outdoor,Sandstone Floor Tile,Sandstone Porcelain Tile,Sandstone Wall Tile,Sandstone Look Tile
UMS New Materials Industry Co.,LTD , https://www.ums-factory.com
