Explosion-proof metal halide floodlights do not shine how to do?
There are several reasons why the light doesn't come on. The main reasons are as follows:
A: The light bulb, lamp holder burned, maintenance methods: replace the same type of light bulbs and lamp holders;
Second, the trigger or capacitor burns, replace the same type of trigger or capacitance; you use the test pencil to test the screw power, does not necessarily represent the circuit is through, it is best to open the entire electrical box, look inside the electrical box No electric device burns out, or the circuit burns out. (Also, you use this kind of explosion-proof light, the quality is very poor, often bad is normal now)
Thank you, go back and check again to see the explosion-proof light circuit. Which kind of explosion-proof light is better?
From the surface, the explosion-proof lamps have smooth surfaces without sand holes, no dents, and are sprayed with yellow plastic according to the national standard. They are uniform and leak-free. They have the EX logo, small knots and flat surfaces, and pure, transparent glass with no bubbles and impurities. The filaments and accessories on the luminaires are generally made of 201 stainless steel. The minimum pressure of the lamp shell is not less than 6 MM, and the glass thickness is the lowest not to be 8 MM. It is best to check the explosion-proof card. Many of the company's explosion-proof licenses are of the same type. It is best to use relevant testing agencies to verify the correctness of the explosion-proof card. Explosion-proof lighting sources and electrical appliances use a good brand, do not contain cheap water.
This is a pair of carbon brushes complete with the holder suitable for Ceset motors.
Washing machines have electric motors and some motors have carbon brushes, the purpose of these brushes are to conduct electricity from the fixed parts of the motor through the moving parts of the motor.
These motors are fitted across a large range of different manufacturer's washing machines including Bosch, Indesit, Whirlpool and Zanussi.
Compare your existing carbon brushes to the picture, paying special attention to the position of the screw holes and positioning lugs on the side of the holder. The carbon brush itself is held captive in the holder by a small plastic hook which would be removed during fitting allowing it to extend out to the motor armature.
Please check model fit list to ensure this part is correct for your model.
Lg Carbon Brush,Lg Washing Spare Parts Carbon Brush,High Quality Carbon Brush For Lg,Lg Carbon Brush In Motor
Haimen Hailing Carbon Industry Co., Ltd. , http://www.carbonbrush-hl.com