Explosion-proof explosion-proof lighting features
1. Temperature measurement. The test point of the highest surface temperature of explosion-proof explosion-proof lamps is on the outer surface of the lamps. Increased safety explosion-proof lighting requires that the maximum surface temperature of any component should not exceed the corresponding temperature group, the maximum surface temperature of the lamp appears on the bulb of the light source. Therefore, the temperature classification of the increased safety lighting fixtures using flameproof lamps with the same light source (due to the difference in test points, one outer surface and one inner surface) should be at least 1 and 2 groups apart. By determining the temperature group's increased safety explosion-proof luminaires in this way, there is no high temperature that can ignite the explosive mixture.
Explosion-proof explosion-proof lamp structure features:
2. The lamp holder has a flameproof cavity structure. The portion of the screw base that may produce sparks when replacing the lamp should be placed in a separate flameproof chamber. In order to prevent the spiral light bulb from loosening itself in the lamp holder, the rotation torque and the unwinding torque of the lamp holder should meet the requirements of the standard. The pin and lamp base of a single pin without starter fluorescent lamp shall comply with the requirements of the Fa6 lamp holder, and its structure is also a flameproof structure. This structure avoids the generation of sparks.
Explosion-proof explosion-proof lamp accessories selection:
3. Components such as switches and triggers that may generate sparks or dangerous temperatures should be placed in a flameproof enclosure or in a housing that provides equal safety margins (eg, encapsulation, sand filling, etc.) to avoid ignition of flammable gases.
Explosion-proof explosion-proof light source matching:
4. The choice of light source. Compared with other types of explosion-proof lamps, the increased safety type explosion-proof lamps require the light source to be the most stringent. The light sources allowed for the feeder-powered luminaires are:
A. Fluorescent lamps with a single pin and no starter;
B. General purpose incandescent lamps;
C, mixed light (self-ballasted mercury lamp).
Oushida demolition hammer, breakers, Demolition Breakers are up middle quality machine.It is combi on one machine.They could load more bigger working intensity.Similar with top quality.Don't have many functions,but simple switch let machine has longer working longevity.
The silicon steel is 60# cold-roll steel.Also has one C&U bearing.Easy and fast working feeling from dragon can tools.
The chuck is easy to change also.It provide high efficiency working.
Every batch of finishing machines must be testing,Every machine must pass.
We have machinery workshop,injection workshop,motor workshop.
OUSHIDA/WSLN Demolition Breakers
OUSHIDA Demolition Breakers, OUSHIDA Demolition Breaker Hammers, OUSHIDA Demolition Hammers, Electric Demolition Hammer
Yongkang Longneng Power Tools CO., LTD. , http://www.longnengtool.com